Wednesday, December 30, 2015

25.5 in the USA

So 25.5 motor F1 has started to take hold in some parts of the country.  There seems to be some out there that feel that this is the wrong direction for the class.  The arguments range from "F1 should be hard" to "there will be a motor/battery war".    I'm not sure what class does not benefit from good equipment, but making a class "hard", and creating barriers to entry is not the way for what is a niche class for most.  

When the idea of 25.5 motors was first mentioned to me, I was ambivalent to the idea.  21.5 was working fine, and I didn't really see what the point was.  At the same time, I figured if it got more guys involved, that is a good thing.  There had been a slow decline in general F1 participation in many parts of the US, including Southern California, where UF1 started and built the class up.  The series was pretty much over there.

The remaining guys decided to try something at the club races: 25.5 motors.  Oddly enough, the same idea was tried in Cleveland Ohio at the Gate r/c club.  Both places found pretty much the same thing, that the cars were much more docile, but produced almost the same lap times.  Even more important, a wider range of skill levels could get the most out of the car, making better racing.

Bill Jeric and his Tuning Haus Scale Series in SoCal instituted the 25.5 motor, and they have increased F1 attendance. Both the Halloween Classic race at the Gate and the US Indoor Champs ran 25.5, and the racing was much better.  There was a lot more racing and a lot less hanging on.  Even at my home track, there is now a heat of cars weekly, where there was lucky to be any F1 racing outside of special events like the Tamiya series or UF1 MIDWEST.
I don't know if this is the answer for outdoor racing.  While a little less motor should make an easier to tame car on outdoor surfaces with less bite, the tracks are bigger.  There will still be a segment that will want to take advantage and go a little faster.

Sunday, December 13, 2015

What just happened??

Xray introduced the X1 a while ago, and proceeded to issue a bunch of beatdowns at the ETS races in Europe, among other places. Until this point, there were several ideas on how to build an F1 chassis, but most involved an inline battery.

The front ends were also hit or miss depending on which car you had.  The Tamiya front end was pretty durable, and fairly adjustable if you threw the Exotek parts on it.  It still had limitations. Speedpassion had some good ideas, but it was hard to set with the shims and graphite plate..maybe a bit complicated for what it did.  Some others like CRC and VBC tried to be a little more straightforward yet functional.

So now there has been a sudden swarm of cars based on the "Xray layout" - transverse battery, graphite plate front end parts, and often, a bellcrank steering system.

Xray  X1 2016

VBC LightningFX
Bringing back the old front end, but with the
 bellcrank instead of direct steering

Roche Rapide

Exotek
Still retaining the Exotek IFS front end
TOP Racing
No bellcranks. adjustable servo angle 

Serpent F110SF2


CRC 
US Indoor Champs winner, 
note machined bulkhead for upper link 


So in the last six months, there seems to have been a consensus built on the success of the Xray X1.  Only Tamiya carries on with an inline chassis configuration.  Ironically, a Tamiya car has taken second place at the most recent ETS race in the Czech Republic.  It's hard to know if Tamiya will introduce a car along these lines, knowing their desire to produce scale appearing race cars.  The TRF102 was only introduced last summer, but the TRF line would be the only way that made sense for a pure race car to make its appearance.  

In my own experience, the Xray cars have easily had .2 seconds per lap on a carpet track over a typical Tamiya car right out of the box.  They did not seem to diff as badly, and overall had much more stability.  On top of everything else, the front end adjusts easily, with all the aspects you'd like to control (camber , caster . roll center, camber gain, etc.).

Perhaps this is a sign F1 is gaining traction as a class worldwide and can finally have some staying power.

Many pictures stolen from REDRC